How to Reset Netgear Nighthawk Router [Updated 2020]

Reset Netgear Nighthawk Router
When you get a Netgear Nighthawk router on your own, you do your home network a massive favor. It was launched with a single objective in mind; to increase the experience of obtaining the internet in a high notch way. Netgear Nighthawk router allowed gamers and people who loved streaming 4K quality videos and movies around the world to access a world of fast internet.

Though its usability is incontrovertible, the most often raised question had constantly been the best way to reset Netgear router password' or the best way to reboot Netgear modem ?' Yes, the router is a strong and robust device but frequently people become overwhelmed while attempting to get into the login page to reset the device or don't know when is a reset of this device required.

Before we inform you about the reset procedure, it's important to understand that there will be a few consequences of the same. The first outcome would be that you would eliminate all your previously saved settings. This includes SSIDs, passwords, and any other preset ones.

Fundamentally your router becomes as it was when you first got it home. With no pre-saved setting and as fresh as a shiny penny.

You really do need to follow a couple of steps in order to know the answer to the question 'how to reset Netgear router password'. There are just two ways to basically reset the Netgear Nighthawk router through software and through hardware:

How to Reboot Netgear Router from Web Browser?

Connect to the Netgear Nighthawk router so as to access the Netgear Router login web page. To do so, use a cable and connect it in the LAN port of the PC to the LAN port of the Netgear device.
1. Once you have access to this network, start an internet browser and visit the web address http://www.routerlogin.com or http://www.routerlogin.net. You can even access the IP 192.168.1.0 or even 192.168.1.1.
2. You will be prompted to enter the login credentials to the device.
3. Input the credentials to enter into the default webpage of this router. The username will be admin and the password will be password.
4. Once you're routerlogin admin panel, go to the advanced option.
5. You may locate the choice router reboot on this page. Under this, you will find that the Reboot button. Press wait for a minimum of two minutes.
6. Permit the device some time while it's resetting. When the device is reset, it is going to be rolled back to default settings. If for some reason your Netgear login won't reset, you might be needed to reset it using the Hard Reset method.

Hard Method to Reset Netgear Router Password

Pick your Netgear Nighthawk router and look at its back. There you find the Router Reset button.
Use a small and sharp object like a paper clip or a pin to press this button. Press and hold down the reset button for at least 5 minutes and wait until all lights start flashing.

When the lights stop emitting, wait for the router to complete its reboot process. Your router is going to take a while to reset itself and will reboot. When the router turns back on, make all of the proper settings once again. This will require you to begin with the installation process again.

Thus with that, you'll have the ability to reset your Netgear Nighthawk router with quite some ease. If you still need any kind of assistant with this, then get in touch with us through comments.