How to Fix Netgear_Ext Not Showing on Network List Issue?

How to Fix Netgear_Ext Not Showing on Network List Issue?


Netgear range extenders have proved to be cardinal networking devices in order to cater to internet requirements of people. Users can connect their WiFi client devices to the extender's network to watch online movies, play multiplayer games, surf the internet, and do much more. But, it is quite disappointing when users are unable to see the extender's network name i.e. Netgear_ext on their network list.

If you are also going nuts due to the same issue, then this piece of writing will put an end to your misery. Here, we will reveal different troubleshooting tactics to resolve the 'Netgear_ext not showing on network list' issue. So, read on.

Solved: Netgear_Ext Not Showing on Network List

  1. Reboot Your Netgear Extender

You might be unable to see the extender's Netgear_ext on your network list due to technical glitches. But, you need not worry as technical glitches can be fixed by rebooting the extender.

Walk through the below-mentioned steps to reboot your Netgear WiFi extender:

  • Switch off your Netgear range extender.

  • Give your Netgear extender some time to rest.

  • Now, switch on your Netgear WiFi device.

Once your Netgear extender has rebooted properly, refresh your network list and check if the extender's network name appears on it.

  1. Check the Internet Connection

Another reason why the extender's Netgear_ext is not showing on your network list is a weak internet connection. To get the issue fixed, make sure that you have access to a super-fast internet connection.

If needed, ping your Internet Service Provider. Verify whether the issue is from his side. If it is, ask him to resolve it.

  1. Perform Netgear Firmware Update

Have you ever noticed how your smartphone starts acting weird when it requires an update? Well, your Netgear extender is in a similar situation. An outdated firmware of the extender is not allowing Netgear_ext to appear on your network list. So, perform Netgear firmware update to get the issue resolved.

Given below is the process of updating the firmware of the Netgear wireless range extender:

  • Power up your computer and open an updated web browser on it.

  • Type www.mywifiext.net into the address bar of the web browser and press the Enter key to proceed.

  • Enter the default username and password of your WiFi device into the given fields and click Log In.

  • On the Netgear Genie dashboard, click Settings > Administration.

  • Find the Firmware Update option.

  • Once found, click it to check if a new firmware version is available for your Netgear extender.

  • If an update is available, follow the on-screen commands and get your Netgear extender updated.

Caution: Do not perform any background tasks on your computer while executing the firmware update process.

  1. Bring Your WiFi Devices Closer

Have you placed your Netgear extender and router too far? Well, you shouldn't have. To rectify your mistake, reduce the distance between your WiFi devices. Place them in the same room. However, ensure that they are not too close to each other as it can cause a clash of WiFi signals resulting in more trouble than you're already facing.

  1. Reset Your Netgear Extender

Followed all the aforementioned steps, but the extender's Netgear_ext is still refusing to show on your network list? If yes, then don't worry. We have a masterstroke left. Performing factory default reset of your Netgear range extender will definitely bring you success in resolving the issue you are currently facing.

Give a read to the following instructions in order to reset your Netgear WiFi extender:

  • Make sure that your Netgear range extender is receiving a consistent power supply from the wall outlet.

  • Once confirmed, start looking for the Reset button on the Netgear range extender.

  • Take a paper clip or a pin and press the Reset button with its help.

And, you're done. Your WiFi range extender will get restored to the factory default settings.

Now, access the mywifiext page and configure your wireless extender from scratch. Once done, refresh your network list and check if the extender's Netgear_ext appears on it.

The Final Words

This was all about how to fix the Netgear_ext not showing on the network list issue. If this write-up brings you success in getting rid of the issue, do leave a word of appreciation in the comment section.

Read more : Unable to Access Netgear Router Login Page? Here’s the Fix!

5 TIPS TO KEEP YOUR NETGEAR NIGHTHAWK AC1900 ROUTER SECURE