Detailed Guide to Troubleshoot Netgear Orbi Purple Light Issue

Detailed Guide to Troubleshoot Netgear Orbi Purple Light Issue

 


Out of the many issues that Netgear Orbi users have been facing, Orbi purple light issue is sitting at the top. Is the LED on your Orbi router also blinking purple? If you are nodding your head in yes, then it is recommended that you take a brisk walk through this article. By the time, you are done reading it, surely the purple light issue would have bid adieu to you.

Resolved: Netgear Orbi Purple Light Issue

  1. Restart Your Netgear Orbi Router

One of the major reasons why you are facing the purple light issue is because technical glitches caught hold of your hand when you were performing Netgear Orbi setup. To get rid of these glitches, consider rebooting your wireless device.

In order to reboot your Netgear Orbi router, you need to unplug it from its wall socket, wait for a couple of seconds, and then, plug your device back into its wall socket.

  1. Check the Ethernet Connection

The Ethernet cable connecting your Netgear Orbi router and the existing modem should not be damaged from any point. On the off chance, it is, then it is recommended that you connect your devices with the help of a damage-free Ethernet cable.

If you don’t feel like opting for this solution, then consider using a wireless source to create a connection between your devices.

  1. Verify the Power Supply

Another thing that might have led you to the Netgear Orbi purple light issue is an inadequate power supply. Therefore, make sure that the wall socket into which your wall socket is plugged is not damaged.

In case, it is, then plug your Netgear Orbi router into a different wall outlet. That might resolve the purple light issue for you.

  1. Perform Orbi Firmware Update

What happened? Are you still struggling with the Netgear Orbi purple light issue? Well, that is unfortunate. But, worry not. Take the help of the guidelines mentioned below and learn how to update Orbi firmware to its latest version:

  • Switch on your PC.
  • Open an internet browser and access orbilogin.
  • Once you have accessed the Netgear Orbi login page, enter the default admin details.
  • Click the Log In button.
  • Now, head over to the Settings section.
  • Select Maintenance > Firmware Update.
  • Follow the on-screen prompts.

As soon as you are done updating the firmware of your Netgear Orbi router, check whether the LED on your device has turned green. Did you still get no luck? Well, that might be because of WiFi interference. Thus, follow the next hack.

  1. Avoid WiFi Interference

Cordless phones, washing machines, baby monitors, Bluetooth speakers, mirrors, fish tanks, treadmills, televisions, refrigerators, microwave ovens, aluminium studs, and utensils containing a large amount of water should not be placed near your Orbi router.

Additionally, don’t you even think of placing your Netgear Orbi router in corners and near thick concrete walls.

  1. Reset Your Netgear Orbi Router

If none of the aforementioned troubleshooting hacks have helped you get rid of the Netgear Orbi purple light issue, it’s high time you perform factory default reset.

Take the help of the instructions given below and understand how to restore your wireless device to the factory default settings:

  • Locate the Reset button on your Netgear Orbi wireless router.
  • Once found, carefully press it for some time.

Now that your device has been reset, reconfigure it by accessing the orbi login page.

Wrapping Up

Netgear Orbi purple light issue is one of the most common issues that users experience. However, it isn’t that hard to troubleshoot. We hope that the troubleshooting hacks mentioned above in this article helped you get rid of the issue you were facing. If they did, do leave a word of appreciation in the comment section.

Post a Comment

0 Comments