How to Resolve Linksys Extender Red Light Issue?

Out of the many issues that users face with their Linksys range extenders, the red light issue is sitting at the top of the shelf. If the LED light on your Linksys range extender is also flashing red, then, unfortunately, you are in trouble.

But, waste no more time worrying about this silly technical issue. Take a walk through the troubleshooting hacks mentioned below and learn how to rectify it in a jiffy.

Rectified: Linksys Extender Red Light Issue

  1. Check the Power Supply

An improper power supply is a topmost reason why you are struggling with the Linksys extender red light issue. Therefore, you need to have a look at the power socket into which your Linksys extender is plugged. If you find any damages, then it is recommended that you plug your extender into a different power source.

  1. Switch to a Different Connection Source

If the Linksys wireless range extender is connected to the host router using a wireless source, then it is quite obvious why you are facing the red light issue. Therefore, switch to a different connection source to troubleshoot this issue. By a ‘different connection source’ we mean, you need to use an Ethernet cable to connect your devices.

Just make sure that the cable you have brought is not worn out or damaged from any point. Also, ensure that it has no cuts on it.

  1. Reduce Distance Between the Devices

You can also consider bringing your Linksys wireless range extender close to your home router in order to troubleshoot the red light issue. This will ensure that the distance between your wireless devices are able to transmit signals in a proper way.

Note: Your devices should not stick to each other in literal terms. Otherwise, their WiFi signals might clash and lead you to further technical issues.

  1. Perform Linksys Firmware Update

If you are still experiencing the Linksys extender red light issue, then it is recommended that you perform firmware update of your device.

The following steps will help you in updating the firmware of your Linksys range device:


  • Open an internet browser on your device.
  • Log in to your Linksys extender using the default admin details.
  • Once you are on the Linksys WiFi setup wizard, click the Firmware Update button.

And that’s it! Now, check the status of the LED on your Linksys wireless range extender.

  1. Avoid Signal Interference

Keeping WiFi interference at bay can also troubleshoot the Linksys extender red light issue. Thus, eliminate WiFi interference by placing your extender away from the following things:


  • Aluminium studs
  • Corners
  • Concrete walls
  • Mirrors
  • Fish tanks
  • Treadmills
  • Televisions
  • Refrigerators
  • Microwave ovens
  • Cordless phones
  • Bluetooth speakers
  • Baby monitors
  • Washing machines

Also, place the Linksys range extender away from utensils containing a lot of water.

  1. Perform Factory Default Reset

Did the last hack not help you fix the red light issue? Well, this requires a quick factory default reset. Take the help of the following steps and get to know how to reset your Linksys extender in a matter of minutes:

  • Try to locate the Reset button on your Linksys extender.
  • Hold on for some time after pressing the button.

Now, you need to configure your Linksys wireless range extender by accessing the web address.

Summing Up

With the last hack, you will find that our guide on troubleshooting the Linksys extender red light issue has come to an end here. We hope that after taking the help of the aforementioned hacks, getting rid of the red light issue was easy for you.

If you liked reading this post, it is recommended that you leave a word of appreciation in the comment section whenever you feel like it.